MARELUX hydrophone for underwater housings

With this MARELUX hydrophone, you'll be able to capture high-fidelity audio during your diving outings!

Technical Specifications:

• Sensitivity: -33±2 dB
• Signal-to-Noise Ratio: 80 (Typ.) dB
• Length:...

Marelux Cross Mounting Bar II with housing mounting balls

This mounting bar gives you the opportunity to provide additional support to your equipment. with this crossbar, you already have 3 mounting balls to attach additional accessories for your dives.

Marelux Cross Mounting Bar II without housing mounting ball

This mounting bar gives you the opportunity to provide additional support to your equipment. With this bar, you can attach 3 mounting balls to secure additional accessories for your dives.

Conversion kit for MARELUX housing for ARRI ALEXA Mini LF

MARELUX underwater rear mirror 

With this underwater mirror, by attaching it to your MARELUX housing, you can better observe what is behind you.

Y shaped mount with mounting ball for MARELUX housing (M5 screw)

MARELUX Housing Mounting Ball (1/4" screw)

This mounting ball is intended to be mounted on the tray of your MARELUX housing. It is secured with two 1/4" screws, and its O-ring ensures a secure attachment of the arm without the risk of breakage.

MARELUX Housing Mounting Ball (M5 Screw)

This mounting ball is intended to be mounted on the tray of your MARELUX housing. It is secured with two M5 screws, and its O-ring ensures a secure attachment of the arm without the risk of breakage.

MARELUX macro ball mount (with 2 housing mounting balls)

MARELUX Macro ball mount (with 2 housing mounting balls) capable of supporting MARELUX macro ports, except for the 32mm macro ports.

Ikelite 3 way clamp for 25 mm balls

This 3-way clamp can be mounted on any 25 mm arm ball and allows you to double the arm extensions to add new accessories.

The plates are equipped with springs for easy assembly and breakdown of your arm system.

Compatibility:

The Ikelite 2-way Clamp for 25mm balls, Mark II type, is compatible with the 4081.71 offset auxiliary mount

This 2-way clamp can be mounted on any 25mm arm ball. Its aluminum handle and sturdy design ensure optimal operation for years.

The offset threaded mount allows you to...

Ball joint BJ05 SUPE / SCUBALAMP :

Ball of 25 mm in black anodized aluminium with stainless steel screw 6mm.

Technical characteristics:

• materials used: black anodized aluminium
• weight on ground: 29 g

HS hot shoe SUPE / SCUBALAMP :

Black anodized aluminum HS made to be mounted on your housing.

Technical data :

• materials used: black anodized aluminum
• weight on land: 15 g

Reinforced hot shoe mount HS-B SUPE / SCUBALAMP :

Black anodized aluminum HS-B made to be mounted on your housing.

Technical data :

• materials used: black anodized aluminum
• 45° angulation
• weight on land: 20 g

Reinforced hot shoe mount HS-YS SUPE / SCUBALAMP :

Black anodized aluminum HS-YS made to be mounted on your housing.

Technical data :

• materials used: black anodized aluminum
• weight on land: 20 g

GoPro SUPE / SCUBALAMP ball joint:

Black anodized aluminum ball joint made for your GoPro or other action cameras.

Technical data :

• materials used: black anodized aluminum
• weight on land: 15 g

Double Clamp AC42 SUPE / SCUBALAMP :

Explore the different lighting possibilities with this double clamp. The AC42 allows you to connect, for example, a diving light and additional accessories to a single ball joint.

The advantage of this clamp is that it is very strong and has...

AC04 ball clamp SUPE / SCUBALAMP :

Explore the different lighting possibilities with this ball clamp. The AC04 is designed to add additional mounting options to an existing joint.

This gives you a wide range of lighting options and freedom depending on the type of diving you...

AC03 SUPE / SCUBALAMP clamp:

Explore the different lighting possibilities with this triple clamp. The AC03 allows you to connect a focus light, a GoPro and additional accessories to a single ball joint. 

This gives you a wide range of lighting options and freedom depending on...

25 mm ball joint SUPE/SCUBALAMP :

25 mm ball joint, thought to be resistant thanks to the aluminum which constitutes it. 

Technical data :

• Made of highly resistant aluminum
• Supplied with M6 bolt

Dimensions:

• Ball: 25 mm
...

Supe / Scubalamp 5,9" float arm:

Thanks to this Supe float arm, you will be able to lighten your whole system by mounting it on your tray. 

Made of carbon fiber, this arm will guarantee you a solidity to any test as well as a duration in time. Being equipped with two 25 mm...

Supe / Scubalamp 5,5" float arm:

Thanks to this Supe float arm, you will be able to lighten your whole system by mounting it on your tray. 

Made of carbon fiber, this arm will guarantee you a solidity to any test as well as a duration in time. Being equipped with two 25 mm...

Supe / Scubalamp 12" float arm:

Thanks to this Supe float arm, you will be able to lighten your whole system by mounting it on your tray. 

Made of carbon fiber, this arm will guarantee you a solidity to any test as well as a duration in time. Being equipped with two 25 mm...

Supe/Scubalamp 25 mm ball joint:

Aluminum ball joint with its 25 mm attachment ball. This ball joint from Supe is designed to be adapted to the following handles: TG10, TG15, TG20. 

Technical characteristics :

• materials used: → aluminum, black anodized
...

TG15 Supe / Scubalamp handle:

Ergonomic handle supplied with a 25 mm direct mounted ball end. 

The Supe TG15 is finished with an aluminum alloy and it is very compact so you can easily carry it in your luggage if you are a traveler!

Finally, the TG15 can also be mounted...

AC02 SUPE / SCUBALAMP clamp:

Explore the different lighting possibilities with this double clamp. The AC02 allows you to connect, for example, a modelling light and additional accessories to a single ball joint. 

This means that the lighting possibilities are very varied and...

Aluminium photo arm with 25 mm ball with clever length adjustment system:

Adjustable arm with 25 mm diameter ball joints. Made of aluminum. The arm measures 185 mm folded for a maximum extension of 265 mm.

Technical data :

• Terminals with 25 mm diameter ball...

DE ARM - 10 inch Supe / Scubalamp :

Why we prefer these on our camera systems?  The detachable arms allow us to extend beyond the range of or our traditional arms. We can [detach] remove a light and help "set up" a shot or fill the frame--illuminate a specific foreground, or...

Terminaison boule 25mm pour bras flex 1/2"

S'adapte sur les bras flexibles en 1/2"

Support de lampe YS sur bras flex 1/2" et 3/4"

Ce support permet de fixer une lampe ou un petit flash sur les éléments flexibles d'un bras flex 1/2" ou 3/4"

Support long clampable sur poignées Ikelite pour bras flexibles 3/4".

Ce support est spécifique pour adapter les bras flexible 3/4" sur une poignée Ikelite

Embase pour poignée Ikelite et connecteur C1

Extension à boule 25mm pour poignée IDAS HD-GN

Cette extension se fixe ditectement sur la poignée IDAS HD-GN. Fixation par demi coquille maintenue par 2 vis inox.

Caractéristiques techniques:

• Terminaisons: boules de 25mm avec joint torique pour une...

Support spécial à boule 25 mm ( 1") pour platine Steady GOPRO. Nouveau système Ikelite type Mark II

Ce support permet une adaptation sur la partie gauche ou droite des platines pour GORPO Steady Ikelite

Matière: boule aluminium, visserie inox

Vis de serrage universelle en aluminium anodisé type pas Kodak mâle et femelle

Fin de série, quantités limitées en stock.

Caractéristiques

• Filetage: Pas Kodak mâle / 1/4-20 UNC et pas Kodak femelle / 1/4-20 UNC
...

Support boule alu 25mm avec fixation type pas 1/4-20 UNC Kodak femelle

Caractéristiques

• Diamètre boule: 25mm
• Filetage: Pas Kodak femelle / 1/4-20 UNC
• Matière: aluminium anodisé

Couleurs disponibles

• Bleu
...

Anneau de sécurité en aluminium anodisé avec fixation type pas Kodak universelle

Cette fixation avec vis au pas universel Kodak (pas des appareils photos, trépieds...) permet de sécuriser votre accessoire avec une dragone.

Couleurs disponibles

• Bleu
...

Terminaison YS pour bras flex 1/2"

Permet d'adapter un flash ou un éclairage équipé d'une terminaison YS/ Sea&Sea sur un bras flexible 1/2"

Support spécial à boule 25 mm ( 1") pour GOPRO. Nouveau système Ikelite type Mark II

Ce support permet une adaptation d'un caisson de GOPRO ou similaire sur un système de bras à boule 25mm.

Matière: boule aluminium, support Gopro ABS

Bras aluminium Ikelite à boules de 25mm type Mark II. Longueur de 13 cm à 31 cm

Extension de bras à boule en aluminium de qualité type aéronautique. Ce bras aluminium à boule permet de déporter les éclairages ou les flashs sous marin afin d'éliminer les phénomènes d'ombre portée...

Support spécial à boule 25 mm ( 1") coulissant pour bras Ikelite et I-Das

Ce support s'adapte directement sur les bras de la marque I-Das ainsi que sur le bras Ikelite 4081.07. Il devient alors possible de déplacer facilement

Livré avec

• Support coulissant...

Support auxiliaire spécial à boule 25 mm ( 1") pour s'adapter sur les pinces de serrage 4081.22

Ce support s'adapte directement sur les pinces de serrage Ikelite réf. 4081.22 et permet de créer un départ à 90° de la pince de serrage.

Support spécial à boule 25 mm ( 1") pour bras à boule type Mark II

Ce support s'adapte directement sur le dessus des caissons reflex Ikelite et sur les poignées vidéo des caissons vidéo Ikelite.

Ce modèle qui intègre un joint torique pour diminuer les frottements remplace la...

Fixation à boule 25mm pour flashs Ikelite série DS IKE 4081.4 type Mark II

Boule diamètre 25 mm (1")à rail mâle pour fixation dans les rails femelles des flashs DS50, DS51, DS125,DS160 et DS161 Ikelite.

Cettefixation intègre un joint torique pour diminuer les frottements.

Clamp de serrage 3 voies Ikelite pour boules de 25mm.

Cette pince de serrage 3 voies se monte sur n'importe quelle boule de bras 25mm et permet de doubler les départs de bras pour ajouter de nouveaux accessoires.

Compatibilité:

• Ikelite
...

Kit de fixation pour caméra gopro pour adaptation sur les supports de dessus de caisson reflex Ikelite.

Livré avec:

• 1 support Gopro
• 1 embase Locline pour dessus de caisson Ikelite
• 1 élément d'interface Locline 1/2" / 3/4"
• 4 éléments...

Support spécial à boule 25 mm ( 1") pour éclairage photo-vidéo Vega Ikelite.

Ce support s'adapte directement sur l'éclairage Ikelite Vega pour s'adapter sur le dessus des caissons reflex Ikelite et sur tout sytème de bras à boule de 25mm par l'intermédiaire de pinces de serrage.

Embase courte clampable sur poignées Ikelite à boule de 25 mm ( 1").

Pour la fixation d'un bras aluminium à boule de 25mm par l'intermédiaire d'une pince de serrage sur une platine Ikelite à poignée clampable.