Decanting hose for pressure balancing between 2 diving, shooting or paintball air bottles with compatible DIN 230 and DIN 300 bar connection

Decanting hose with pressure gauge for pressure balancing between 2 diving, shooting or paintball air bottles with compatible DIN 230 and DIN 300 bar connection

Optional Pressure maintening valve for COLTRI ICON 100 or MCH6

This option can be fitted as standard in the factory or retrofitted by you very easily.

The pressure maintaining valve or valve optimizes the quality of filtration by preventing air from leaving the compressor until...

Automatic purge kit and automatic shut-off for all models of COLTRI MCH6 electric compressors.

This option can be installed as original equipment at the factory or easily adapted by you later.

Supplied with:

• 1 set of stainless steel 316L high-pressure solenoid...

Automatic shut-off kit for all models of electric and gasoline-powered COLTRI ICON / MCH6 compressors

This option can be installed as original equipment at the factory or easily adapted by you later.

Supplied with:

• 1 pressure switch automatic shut-off kit with...

Automatic purge kit for all models of COLTRI MCH6 electric compressors.

This option can be installed as original equipment at the factory or easily adapted by you later.

Supplied with:

• 1 set of stainless steel 316L high-pressure solenoid valve + timer + electrical...

Cylinder valve DIN 230 bar PI for cylinder with 25x200 thread. Norm PI for cylinders marked PI

Livré avec:

• Valve PI with outlet DIN 230 bar
• 1 O-ring

Technical data:

• Working pressure: 230 bars
• Thread of the...

Raccord de gonflage Paintball Quick Disconnect sécurisé par clapet anti-retour.

Permet d'éviter le fouettement du flexible de gonflage si il n'est pas raccordé à un lanceur de paintball lors de l'opération de remplissage.

L'accessoire indispensable pour la sécurité...

Adaptateur de gonflage DIN 230 bar femelle / Quick Disconnect 3000 psi

Cet adaptateur permet le gonflage en direct d'un lanceur de paintball depuis le raccord de gonflage de votre compresseur.

Filling station PAINTBALL V3 inox DIN with quick dosconnect . Compatible 3000 psi & 4500 psi

This sturdy, all-stainless steel filling station transfers air from a scuba tank to a 3000 psi rental launcher or a 4500 psi competition launcher (operating pressure of 300 bars)

Industrial valve DIN 200-230 bar / 25E for gas cylinder

Technical datas:

• Working pressure: 230 bars
• cylinder thread: 25E
• Outlet: DIN 230 bars (Gaz 5/8)
• Weight: 610 grammes
...

Vanne inox à boisseau sphérique 1/4 de tour 2 voies série industrie compatible pour compresseur air et nitrox 40 %.

Caractéristiques & Avantages :

• Indication visuelle du sens de passage: La poignée quart de tour indique la position...

About the LIMITED EDITION COLTRI MCH6/ICON LSE 80 EM 4.8m3/h - Electric Motor 230V

• Limited edition featuring the 80l/min MCH6 block with a flow rate of 4.8m3/h. Tested thousands of times worldwide in the most challenging conditions. This specific version is perfectly sized for...

Vanne de purge Compresseurs Haute Pression

Vanne de purge pour compresseur Coltri ou bouteilles tampon.

Caractéristiques techniques :

• Pression de service: 330 bars
• Raccordement: 1/4" BSPT
• Poids: 69 grammes
...

Contact us for pricing

COLTRI SUPER SILENT 330 ET Compressor

The SUPER SILENT range has been designed to address the following challenge: focus on the essentials, reduced budget, a soundproofed machine, and control systems that allow for...

Nous consulter pour le tarif

Kit de purges automatiques pour tous les modèles de compresseurs COLTRI MCH6 essence.

Cette option peut être montée d'origine en usine ou adaptée ultérieurement par vos soins très facilement.

Se branche...

Contact us for pricing

COLTRI SUPER SILENT 315 ET Compressor

The SUPER SILENT range has been designed to address the following challenge: focus on the essentials, reduced budget, a soundproofed machine, and control systems that allow for...

Opercule ISO pour bouteilles de plongée

insert pour transformer une robinetterie DIN en robinetterie compatible pour les détendeur à étrier.

 Livré avec

• 2 Joints ISO
• opercule BTR 8

Information complémentaire

Contact us for pricing

COLTRI SUPER SILENT 235 ET Compressor

The SUPER SILENT range has been designed to address the following challenge: focus on the essentials, reduced budget, a soundproofed machine, and control systems that allow for...

Robinet pour bouteilles tampons 15L, 20L, 50L et 80L type 25E pour les applications mobiles.

Livré avec:

• Robinet 2 sorties gros cône

Caractéristiques techniques:

• Pression de service: 300 bars
• Filetage bouteille:...

Please contact us for pricing

COLTRI SMART 315 ET Compressor

The SMART range is one of the most widely distributed machines in the world. Equipped with 2 front-facing flexible inflation outlets, a drive motor, a robust compression block, and...

Please contact us for pricing

COLTRI SMART 235 ET Compressor

The SMART range is one of the most widely distributed machines in the world. Equipped with 2 front-facing flexible inflation outlets, a drive motor, a robust compression block, and...

Bouteille tampon acier 12L pour l'industrie, le tir sportif ou le paintball.

Permet de remplir les cartouches de lanceur et les cartouches de tir de manière autonome.

Caractéristiques techniques

• Pression de service: 230 bars (3000 psi)
• Pression...

Please consult us for pricing.

COLTRI ERGO 315 ET Compressor

The ERGO range has been designed to address the following issues: focusing on essentials, a reduced budget, and control systems that enable efficient monitoring of compressor...

Steel cap for gas cylinder

Protects the valve in the event of accidental fall of the bottle

For cylinders of 20L, 30L, 550L and 80L capacity.

Doubleur de sortie DIN 232 bars en T et entrée DIN 300 bars mâle

Permet de connecter 2 détendeurs DIN sur un bloc équipé d'une robinetterie mono.

Permet également la connexion de lyre d'équilibrage pour connecter entre elles plusieurs bloc à gonfler.

Please consult us for pricing.

COLTRI ERGO 235 ET Compressor

The ERGO range has been designed to address the following issues: focusing on essentials, a reduced budget, and control systems that enable efficient monitoring of compressor...

Bouteilles simple ogive de 30 litres, à 300 bars de pression de service.

Caractéristiques techniques:

• Volume: 30 Litres
• Pression de service: 300 bars
• Pression d'épreuve: 450 bars
• Marquage Pi et CE , Homologation TPED et PED
...

The Paintball Coltri ICON LSE EM Standard compressor with a 230-240V single-phase electric motor is designed for small paintball structures

The MCH6 Standard range is the most commonly used and preferred due to its small size and reduced weight. This version has been selected by the...

20 liter single ogive cylinders, at 300 bar working pressure.

Technical characteristics:

• Volume: 20 Liters
• OperatingWorking pressure: 300 bar
• Proof pressure: 450 bar
• Pi and CE marking, TPED and PED approval
• Weight: 34 Kg
...

Kit de 10 joints pour raccord coupleur Quick Disconnect femelle

Les joints s'usent lorsque l'utilisateur oublie de purger la station avant de déconnecter le lanceur.

Livré sans raccord Quick Disconnect.

About the high pressure COLTRI ICON LSE 100 EM 6m3/h compressor - 230V electric motor

• The ICON block is designed to last, having been tested thousands of times worldwide in the toughest conditions. This specific version is perfectly sized for...

High pressure breathing air compressor COLTRI SMART 210 EM - 12.6 m3/h - 240 V single-phase.

COLTRI SMART breathing air compressors represent the evolution of the Standard, one of the best known and best-selling models in the world

3-stage high pressure pumping unit.

Rack de bouteilles tampons pour stockage et redistribution d'air haute pression :

Bouteilles simple ogives de 50 litres, à 300 bars de pression de service : la sortie basse, munie d'un robinet de purge, permet une vidange de la condensation, toujours présente dans des tampons, sans...

Industrial valve DIN 300 bar / 25E for gas cylinder. For cylinder of 20L, 30L, 50L and 80L capacity with a 25E thread

Technical datas:

• Working pressure: 300 bars
• cylinder thread: 25E
• Outlet: DIN 300 bars (Gaz 5/8)
• Weight: 633...

High pressure breathing air compressor COLTRI SMART 125 EM - 7.5 m3/h - 240 V single-phase.

COLTRI SMART breathing air compressors represent the evolution of the Standard, one of the best known and best-selling models in the world

3-stage high pressure pumping unit.

Rack de bouteilles tampons pour stockage et redistribution d'air haute pression :

Bouteilles simple ogives de 80 litres, à 300 bars de pression de service : la sortie basse, munie d'un robinet de purge, permet une vidange de la condensation, toujours présente dans des tampons, sans...

Filling Station for Paintball BULLET PRO 3000 psi with regulator

The Outlet Fill Panel is a perfect solution for those who don't want to waste their time for filling. The station utilizes a valve system that allows filling tanks by paintballers in safe condition. All internal...

Please contact us for pricing

COLTRI ERGO 270 SH PETROL Compressors

The ERGO PETROL range is ideal for intensive professional use. Equipped with 2 front flexible inflation outlets, a drive motor, a robust compression block, automatic drains,...

Station de gonflage paintball 1 sortie régulée à  3000 psi BULLET 1

Station de gonflage ultra compacte inox professionnelle pour le Paintball

Cette station de gonflage robuste de fabrication française permet le gonflage en sécurité des lanceurs de paintball grâce à son...

Rack de bouteilles tampons pour stockage et redistribution d'air haute pression :

Bouteilles simple ogives de 50 litres, à 300 bar de pression de service : la sortie basse, munie d'un robinet de purge, permet une vidange de la condensation, toujours présente dans des tampons, sans...

Raccord Quick Disconnect femelle inox pour gonflage des lanceurs de Paintball.

Ce raccord coupleur Quick Disconnect femelle permet le gonflage des lanceurs de Paintball.

Sa fabrication robuste lui permet également de gonfler les lanceurs de compétition 4500 psi. Une bague...

Paintball compressor Coltri ICON 100 Standard with gasoline engine

This version of the MCH6 compressor has been developed to meet the inflation needs of small paintball structures, such as associations or start-up professionals, for occasional inflation of a 15L buffer block.

About the Coltri MCH3-EM Standard compressor with low consumption 230-240 volt single-phase electric motor

• This version of the MCH3 compressor has been developed to meet the needs of high-pressure air, such as breathing...

Bouteille tampon acier 15L pour l'industrie, le tir sportif ou le paintball.

Permet de remplir les cartouches de lanceur et les cartouches de tir de manière autonome.

Caractéristiques techniques

• Pression de service: 230 bars (3000 psi)
• Pression...

Station de gonflage paintball 1 sortie 4500 psi ou 3000 psi BULLET 1

Station de gonflage ultra compacte inox professionnelle pour le Paintball

Cette station de gonflage robuste de fabrication française permet le gonflage en sécurité des lanceurs de paintball.

Station de gonflage sécurisée loisirs pour cartouches de Tir Sportif

Cette station permet le gonflage en toute sécurité les cartouches d'armes de Tir sportif et PCP munies de raccords d'adaptation DIN.

Cette station est équipée d'une vanne de laminage et d'un limiteur...

Bouteilles simple ogive de 80 litres, à 300 bars de pression de service.

Caractéristiques techniques:

• Volume: 80 Litres
• Pression de service: 300 bar
• Pression d'épreuve: 450 bar
• Marquage Pi et CE , Homologation TPED et PED
• Poids: 105...