COLTRI ICON LSE 100 - 6m3/h electric 230 V engine
COLTRI ICON LSE 100 EM Compressor 6m3/h - 100 Liters/Min - 230 V - 240 V monophase Electric Motor. 230 or 300 Bar Operating Pressure.
About the high pressure COLTRI ICON LSE 100 EM 6m3/h compressor - 230V electric motor
- The ICON block is designed to last, having been tested thousands of times worldwide in the toughest conditions. This specific version is perfectly sized for optimal performance with a 2.2 kW motor. The oil sump capacity has been increased from 0.3 L to 0.6 L on this new compression block to optimize lubrication in difficult conditions, or when used on a boat to limit the phenomenon of hydroplaning with rolling and pitching.
- The ICON compression block is designed for long life and a limited budget. All materials are made of high-energy lightweight alloys for increased reliability. The ground cylinders are ionically nitrided for a high surface hardness that provides increased resistance to wear, friction, and seizing. The crankshaft is mounted on rugged SKF bearings, ensuring long block life, even at high temperatures. The block is covered with a special paint that allows excellent heat dissipation while providing protection against external aggression in a saline atmosphere. The paint facilitates maintenance when cleaning cooling coils. The intermediate cooling coils are made of 316L stainless steel and are sized to provide optimal cooling and increased filter cartridge autonomy.
- The standard range welded chassis promotes good cooling flow and ensures user safety. The chassis includes a gasoline engine, a compression unit, a filtration system, and a flexible output with a DIN or clamp inflation fitting. The powder-coated epoxy resin paint provides effective protection in harsh environments. For the most demanding operating conditions (marine environment), the compressor is also available in a stainless steel chassis version.
- The ICON range compressor is equipped with several filtration systems that certify air quality in accordance with EN 12021 2014 standards. The compression block is equipped with cyclone separators on the 4th stage. The final filtration ensures filtration of oil, odors, and water. A pressure holding valve is available as an option for industrial processes on fixed networks.
STARTUP AND TEK PLONGEE WARRANTY - COLTRI FRANCE AND OVERSEAS DISTRIBUTOR :
- All our compressors are delivered already commissioned, adjusted, and tested in our workshops in France. Equipment ready to use.
- The compressor is supplied with an operating procedure and tips for breaking in and maintenance.
- Telephone support with our team of technicians for maintenance, servicing, and troubleshooting included. 20 years of experience in high-pressure compressed air.
- TEK PLONGEE Warranty - Coltri France Distributor for 2 years *
- Compressors purchased outside the COLTRI France dealer network, especially foreign sites (including those translated into French), are not covered by our services, and these compressors must be returned at your expense directly to the foreign dealer where the compressor was purchased.
Technical specifications :
- Welded chassis with transport handles: black RAL 9005 chassis
- Manual drains (automatic drains optional)
- Safety valve shut off (automatic shut off optional)
- Water and oil separator
- Safety valves
- ECO FILTER ICON / MCH6 filtration
- Hour meter
- 1 front flexible outlet with DIN 230 or 300 bars (optional yoke adapter RE100350)
- 230V - 240V single-phase electric motor, 2.2 kW - 3 Hp
- Compression block flow rate: 100 l / min - 6 m³ / h - 3.5 CFM (cubic feet per minute)
- Compression block speed: 2,250 RPM
- Service pressure: from 232 to 330 bar - 3,300 to 4,700 PSI - to be specified when ordering
- Oil sump capacity: 0.6 liters
- Inflation time: 20 minutes (10L block, empty from 0 to 200 bar)
- Sound intensity / 91 dB (guaranteed Lwa)
- Sound intensity / 88 dB (measured Lwa)
- Sound intensity / 68 dB (measured Lpa)
- Empty weight: 38 kg / 83.7 lb
- Dimensions: 61 x 40 x 39 cm (L x W x H)
- For generator users, a minimum of 4 KVA (5 KVA recommended) is required. Starting peak current is 42 A.
Data sheet
- Height
- 39 cm
- Width
- 61 cm
- Depth
- 40 cm
- Weight
- 38 Kg
- Pression de service
- 230, 300 ou 330 bars
- Énergie
- Electrique monophasé
- Puissance moteur
- 2.2 KW / 230 Volts / 50 Hz
- Intensité sonore en dB(A) à 1m
- 88
- Compresseur insonorisé
- NON
- Matière
- RAL 9005 Black frame
- Purges automatiques
- EN OPTION
- Arrêt automatique
- EN OPTION
- Filtration rechargeable
- NON
- Manomètres inter-étages
- NON
- Filtration PRESEC-SECURUS
- NON
- Nombre de sorties flexibles avec robinet
- 1
- Mobilité du compresseur
- Compresseur mobile
Specific References
Air Filter cartridge for ICON 100 / MCH 6 and EOLO COLTRI
ECO FILTER Air Filter cartridge for ICON 100 / MCH 6 and EOLO COLTRI
Several cartridge models are available depending on the use of the compressor (Select from the list located under the item price):
- For breathing air compressors: CA/TM model (Activ carbon / molecular...
Filtre aspiration pour MCH6
Filtre d'aspiration micronique pour compresseur Coltri MCH 6
Durée de vie:
- Les filtres à air doivent être remplacés au maximum toutes les 100 heures ou 1 fois par an*.
* Remplacement annuel au minimum si application pour air respirable pour...
Option 2ème sortie
Option 2ème sortie pour compresseur MCH6 à MCH36.
Permet de doubler le nombre de blocs à gonfler en simultané. Le Té fourni permet de raccorder le flexible d'origine du compresseur au kit 2ème sortie.
Livré avec:
- 1 raccord en Té pour connectique...
Flexible de gonflage H.P air respirable COLTRI
Ce flexible Haute-Pression équipe de série les compresseurs et stations de gonflage COLTRI.
Kit entretien détendeur CSC000329RID
Kit de révision pour régulateur de pression COLTRI SC000329/RID 2ème génération.
kit pour les détendeurs COLTRI SC000329/RID 2ème génération (filetés sur la partie basse). Ne convient pas aux détendeurs 1ère génération (partie basse hexagonale)
Rallonge de ligne d'aspiration déportée 2 m pour MCH6
Ligne d'aspiration flexible déportée de 2 mètres pour MCH6.
Ce montage flexible permet de déporter la prise d'air d'aspiration des compresseurs MCH6 électrique et essence.
Autres longueurs disponibles sur demande. Il est cependant conseillé d'éviter des...
Courroie pour compresseur COLTRI (par modèle)
Courroie trapézoidale de rechange pour compresseur Coltri (Choisir le modèle dans la liste déroulante située sous le prix du produit)
Une courroie inadaptée peut entrainer des disfonctionnements graves sur le compresseur et des dégâts irréversibles.
Une courroie mal tendue peut...
Synthetic Coltri Oil ST755 for breathing Air, Nitrox, natural gaz
Synthetic Coltri Oil ST755 for breathing Air, Nitrox, natural gaz and COLTRI compressors
This oil is the best choice for better performance on COLTRI Breathing Air compressors, Nitrox compressors (up to 40% of O2) CNG compressors and also Helium and Nitrogen...
Courroie pour compresseur COLTRI (par modèle)
Courroie trapézoidale de rechange pour compresseur Coltri (Choisir le modèle dans la liste déroulante située sous le prix du produit)
Une courroie inadaptée peut entrainer des disfonctionnements graves sur le compresseur et des dégâts irréversibles.
Une courroie mal tendue peut...
Protection pour robinet mono bouteille
Protection pour robinet d'une mono bouteille de plongée
Protège des chocs le détendeur et le robinet de la bouteille de plongée lors des plongées épave ou souterraines.
Sert également de poignée de transport et de levage. Son profil et sa qualité de fabrication permet de...
Adaptateur de gonflage PAINTBALL / DIN
Adaptateur de gonflage DIN 230 bar femelle / Quick Disconnect 3000 psi
Cet adaptateur permet le gonflage en direct d'un lanceur de paintball depuis le raccord de gonflage de votre compresseur.
Synthetic Coltri Oil ST755 for breathing Air, Nitrox, natural gaz
Synthetic Coltri Oil ST755 for breathing Air, Nitrox, natural gaz and COLTRI compressors
This oil is the best choice for better performance on COLTRI Breathing Air compressors, Nitrox compressors (up to 40% of O2) CNG compressors and also Helium and Nitrogen...
Filtre aspiration pour MCH6
Filtre d'aspiration micronique pour compresseur Coltri MCH 6
Durée de vie:
- Les filtres à air doivent être remplacés au maximum toutes les 100 heures ou 1 fois par an*.
* Remplacement annuel au minimum si application pour air respirable pour...
Culot bouteille Carbondive 10-12L - modèle rond
Culot rond pour bouteille carbondive 10L ou 12L de diamètre 181 mm
Protège des chocs et facilite le stockage
Automatic drain valve for MCH6 - ICON
Automatic purge kit for all models of COLTRI MCH6 electric compressors.
This option can be installed as original equipment at the factory or easily adapted by you later.
Supplied with:
- 1 set of stainless steel 316L high-pressure solenoid valve + timer + electrical...
COLTRI Mini Compact 100 EM 2,2 kW Single-phase
Coltri Mini Compact Compressor with 230-240 volts single-phase electric motor
This version of the MCH6 compressor has been developed to meet the needs of High-Pressure air type for breathing air and for small industrial or laboratory processes. It can also be used for Sport Shooting...
COLTRI ICON LSE 100 ET
About the COLTRI ICON LSE 100 ET 6m3/h compressor - 230V electric motor
- The ICON block is designed to last, having been tested thousands of times worldwide in the toughest conditions. This specific version is perfectly sized for optimal performance...
COLTRI MINI SILENT EM electric engine
Nous consulter pour le tarif
Compresseur Coltri MCH6 Silent avec moteur électrique 230- 240 Volts monophasé ou 380-400 volts triphasé
Cette version du compresseur MCH6 a été développée pour répondre aux besoins en air Haute Pression type air respirable et pour les...
COLTRI Mini Compact 100 ET 3 kW Three-phase
Coltri Mini Compact 100 ET compressor with 3 kW three-phase electric motor, 400 volts.
This version of the MCH6 compressor was developed to meet the needs of high-pressure air such as breathable air and for small industrial or laboratory processes. It can also be used for sports...