New products
Fantasea housing Locking Lid Snap
Fantasea housing Locking Lid Snap
This part allows you to replace the Fantasea lid snap in the event of breakage following poor lubrication of the rear door seal.
Composants de bras photo
Composant et pièces de bras alu, flex et carbone
TG15 Gopro tray grip Supe
TG15 Supe / Scubalamp handle:
Ergonomic handle supplied with a 25 mm direct mounted ball end.
The Supe TG15 is finished with an aluminum alloy and it is very compact so you can easily carry it in your luggage if you are a traveler!
Finally, the TG15 can also be mounted...
TG ball joint 25 mm Supe for TG10-TG15-TG20
Supe/Scubalamp 25 mm ball joint:
Aluminum ball joint with its 25 mm attachment ball. This ball joint from Supe is designed to be adapted to the following handles: TG10, TG15, TG20.
Technical characteristics :
- materials used: → aluminum, black anodized ...
12" float arm Supe
Supe / Scubalamp 12" float arm:
Thanks to this Supe float arm, you will be able to lighten your whole system by mounting it on your tray.
Made of carbon fiber, this arm will guarantee you a solidity to any test as well as a duration in time. Being equipped with two 25 mm...
5,5" float arm Supe
Supe / Scubalamp 5,5" float arm:
Thanks to this Supe float arm, you will be able to lighten your whole system by mounting it on your tray.
Made of carbon fiber, this arm will guarantee you a solidity to any test as well as a duration in time. Being equipped with two 25 mm...
5,9" float arm Supe
Supe / Scubalamp 5,9" float arm:
Thanks to this Supe float arm, you will be able to lighten your whole system by mounting it on your tray.
Made of carbon fiber, this arm will guarantee you a solidity to any test as well as a duration in time. Being equipped with two 25 mm...
Long ball joint 25 mm SUPE
25 mm ball joint SUPE/SCUBALAMP :
25 mm ball joint, thought to be resistant thanks to the aluminum which constitutes it.
Technical data :
- Made of highly resistant aluminum
- Supplied with M6 bolt
Dimensions:
- Ball: 25 mm ...
AC03 clamp SUPE
AC03 SUPE / SCUBALAMP clamp:
Explore the different lighting possibilities with this triple clamp. The AC03 allows you to connect a focus light, a GoPro and additional accessories to a single ball joint.
This gives you a wide range of lighting options and freedom depending on...
AC04 ball clamp SUPE
AC04 ball clamp SUPE / SCUBALAMP :
Explore the different lighting possibilities with this ball clamp. The AC04 is designed to add additional mounting options to an existing joint.
This gives you a wide range of lighting options and freedom depending on the type of diving you...
AC42 clamp SUPE
Double Clamp AC42 SUPE / SCUBALAMP :
Explore the different lighting possibilities with this double clamp. The AC42 allows you to connect, for example, a diving light and additional accessories to a single ball joint.
The advantage of this clamp is that it is very strong and has...
GoPro ball joint SUPE
GoPro SUPE / SCUBALAMP ball joint:
Black anodized aluminum ball joint made for your GoPro or other action cameras.
Technical data :
- materials used: black anodized aluminum
- weight on land: 15 g
HS-YS reinforced hot shoe mount SUPE
Reinforced hot shoe mount HS-YS SUPE / SCUBALAMP :
Black anodized aluminum HS-YS made to be mounted on your housing.
Technical data :
- materials used: black anodized aluminum
- weight on land: 20 g
HS-B reinforced hot shoe mount SUPE
Reinforced hot shoe mount HS-B SUPE / SCUBALAMP :
Black anodized aluminum HS-B made to be mounted on your housing.
Technical data :
- materials used: black anodized aluminum
- 45° angulation
- weight on land: 20 g
HS hot shoe SUPE
HS hot shoe SUPE / SCUBALAMP :
Black anodized aluminum HS made to be mounted on your housing.
Technical data :
- materials used: black anodized aluminum
- weight on land: 15 g
BJ05 ball joint SUPE
Ball joint BJ05 SUPE / SCUBALAMP :
Ball of 25 mm in black anodized aluminium with stainless steel screw 6mm.
Technical characteristics:
- materials used: black anodized aluminium
- weight on ground: 29 g
Ikelite 4081.24 Clamp
The Ikelite 2-way Clamp for 25mm balls, Mark II type, is compatible with the 4081.71 offset auxiliary mount
This 2-way clamp can be mounted on any 25mm arm ball. Its aluminum handle and sturdy design ensure optimal operation for years.
The offset threaded mount allows you to...
Ikelite 4081.25 Triple Clamp
Ikelite 3 way clamp for 25 mm balls
This 3-way clamp can be mounted on any 25 mm arm ball and allows you to double the arm extensions to add new accessories.
The plates are equipped with springs for easy assembly and breakdown of your arm system.
Compatibility:
...MARELUX macro ball mount (with 2 housing mounting balls)
MARELUX macro ball mount (with 2 housing mounting balls)
MARELUX Macro ball mount (with 2 housing mounting balls) capable of supporting MARELUX macro ports, except for the 32mm macro ports.
MARELUX Housing Mounting Ball (M5 Screw)
MARELUX Housing Mounting Ball (M5 Screw)
This mounting ball is intended to be mounted on the tray of your MARELUX housing. It is secured with two M5 screws, and its O-ring ensures a secure attachment of the arm without the risk of breakage.
MARELUX housing mounting ball (1/4" screw)
MARELUX Housing Mounting Ball (1/4" screw)
This mounting ball is intended to be mounted on the tray of your MARELUX housing. It is secured with two 1/4" screws, and its O-ring ensures a secure attachment of the arm without the risk of breakage.
Y shaped mount with mounting ball for MARELUX housing (M5 screw)
Y shaped mount with mounting ball for MARELUX housing (M5 screw)
MARELUX underwater rear mirror
MARELUX underwater rear mirror
With this underwater mirror, by attaching it to your MARELUX housing, you can better observe what is behind you.
MARELUX conversion kit for ARRI ALEXA Mini LF
Conversion kit for MARELUX housing for ARRI ALEXA Mini LF
Marelux cross mounting bar II
Marelux Cross Mounting Bar II without housing mounting ball
This mounting bar gives you the opportunity to provide additional support to your equipment. With this bar, you can attach 3 mounting balls to secure additional accessories for your dives.
Marelux cross mounting bar II with housing mounting balls
Marelux Cross Mounting Bar II with housing mounting balls
This mounting bar gives you the opportunity to provide additional support to your equipment. with this crossbar, you already have 3 mounting balls to attach additional accessories for your dives.
MARELUX hydrophone for underwater housings
MARELUX hydrophone for underwater housings
With this MARELUX hydrophone, you'll be able to capture high-fidelity audio during your diving outings!
Technical Specifications:
- Sensitivity: -33±2 dB
- Signal-to-Noise Ratio: 80 (Typ.) dB
- Length:...