New products
Platines et bras photo
Les platines pour caissons vous offrent une excellente prise en main et une meilleure stabilité. Quant aux bras, ils vous permettent de fixer des flashs et éclairages, obligatoires pour obtenir des photos riches en couleurs.
Vis de serrage universelle alu male/femelle
Vis de serrage universelle en aluminium anodisé type pas Kodak mâle et femelle
Fin de série, quantités limitées en stock.
Caractéristiques
- Filetage: Pas Kodak mâle / 1/4-20 UNC et pas Kodak femelle / 1/4-20 UNC ...
Extension pour déclencheur Ikelite 4077.95 V2
Extension pour déclencheur Ikelite 4077.95 V2
Cet accessoire permet une meilleure appréhension du déclencheur de l'appareil photo. Cette extension se monte sur les caissons Ikelite fabriqués depuis aout 2020. Pour les caissons plus ancien (voir numéros de série ci dessous), il faut...
Boule 25 mm pour platine Steady IKE 4081.74
Support spécial à boule 25 mm ( 1") pour platine Steady GOPRO. Nouveau système Ikelite type Mark II
Ce support permet une adaptation sur la partie gauche ou droite des platines pour GORPO Steady Ikelite
Matière: boule aluminium, visserie inox
Compact Ball Arm V2 for Quick Release Handle
25 mm Mark II V2 ball arm with 1 18 cm segment for connecting a declampable Ikelite stage to a photo flash or photo light equipped with a 25 mm ball mount.
The clamps feature a clamping system that prevents the aluminum arms from coming loose if the knob is very loose.
...Extension à boule 25mm pour poignée HD-GN
Extension à boule 25mm pour poignée IDAS HD-GN
Cette extension se fixe ditectement sur la poignée IDAS HD-GN. Fixation par demi coquille maintenue par 2 vis inox.
Caractéristiques techniques:
- Terminaisons: boules de 25mm avec joint torique pour une...
Wide Angle Ball Arm V2 for Quick Release Handle
25 mm ball arm with 2 segments for connecting a declampable Ikelite turntable to a DS series Ikelite flash unit.
The clamps are equipped with a clamping system that prevents the aluminium arms from coming loose if the knob is very loose.
Supplied with :
- 3...
Aluminum 4-inch single arm pack SUPE
This arm pack includes:
- 1 SUPE 4" aluminum arm
- 2 SUPE AC02 clamps
Technical features of the 4" aluminum arm:
- Ball-jointed ends of 25mm
- Constructed from aluminum
- Length: 1 → 4" (10.5 cm)
Technical features of the...
extension for shutter lever TG-B for TG20 tray
The TG-B trigger mechanism provides easy access to the trigger release from the handle of the TG10 single and TG20 double SUPE stages.
Embase Ikelite longue / bras flexible 3/4"
Support long clampable sur poignées Ikelite pour bras flexibles 3/4".
Ce support est spécifique pour adapter les bras flexible 3/4" sur une poignée Ikelite
Aluminum 6-inch single arm pack SUPE
This arm pack includes:
- 1 SUPE 6" aluminum arm
- 2 SUPE AC02 clamps
Technical features of the 6" aluminum arm:
- Ball-jointed ends of 25mm
- Constructed from aluminum
- Length: 2 → 6" (15.5 cm)
Technical features of the...
Vaquita grip - PARALENZ
- More stability
- Allows the camera to be switched on and off with the trigger
- Security with integrated eyelet
- Material: polycarbonate
With the Paralenz Vaquita Grip, you can ensure the stability of videos taken with the Paralenz Vaquita...
Support lampe YS sur bras flex
Support de lampe YS sur bras flex 1/2" et 3/4"
Ce support permet de fixer une lampe ou un petit flash sur les éléments flexibles d'un bras flex 1/2" ou 3/4"
Aluminum 8-inch single arm pack SUPE
This arm pack includes:
- 1 SUPE 8" aluminum arm
- 2 SUPE AC02 clamps
Technical features of the 8" aluminum arm:
- Ball-jointed ends of 25mm
- Constructed from aluminum
- Length: 3 → 8" (20.5 cm)
Technical features of the...
TG20 Camera Tray Dual Handle SUPE
TG20 Universal Turntable. Ideal for GoPro housings, compact housings, Micro 4/3 and SLR housings
Supplied with:
- 1 double width adjustable stage from 302 to 356 mm
- 2 ergonomic aluminum handles with 25 mm ball and
- The housing is fixed with two NC1/4...
Terminaison boule 25mm pour bras flex 1/2"
Terminaison boule 25mm pour bras flex 1/2"
S'adapte sur les bras flexibles en 1/2"
Aluminum 10-inch single arm pack SUPE
This arm pack includes:
- 1 SUPE 10" aluminum arm
- 2 SUPE AC02 clamps
Technical features of the 10" aluminum arm:
- Ball-jointed ends of 25mm
- Constructed from aluminum
- Length: 1 → 10" (25.4 cm)
Technical features of...
Aluminum 12-inch single arm pack SUPE
This arm pack includes:
- 1 SUPE 12" aluminum arm
- 2 SUPE AC02 clamps
Technical features of the 12" aluminum arm:
- Ball-jointed ends of 25mm
- Constructed from aluminum
- Length: 2 → 12" (30.5 cm)
Technical features of...
TG10 camera tray single handle Supe
Supe / Scubalamp TG10 Universal Turntable:
The Supe TG10 tray is ideal for GoPro housings, compact housings, housings for Micro 4/3 and SLR cameras
Delivered with :
- 1 single tray, adjustable from 135 to 165 mm from the central axis of the plate
- 1...
Aluminum 4-inch double arm pack SUPE
This arm pack includes:
- 2 SUPE 4" aluminum arms
- 3 SUPE AC02 clamps
Technical features of the 4" aluminum arm:
- Ball-jointed ends of 25mm
- Constructed from aluminum
- Length: 1 → 4" (10.5 cm)
Technical features of the...
Kit TG20 Camera Tray Dual Handle + TG-B shutter SUPE
TG20 universal stage. It is ideal for GoPro housings, compact housings, housings for Micro 4/3 and SLR cameras
In this kit, you will find the TG-B shutter release extension also from Supe. It is adjustable and allows easier access to the release button from the right handle of your...
Aluminum 6-inch double arm pack SUPE
This arm pack includes:
- 2 SUPE 6" aluminum arms
- 3 SUPE AC02 clamps
Technical features of the 6" aluminum arm:
- Ball-jointed ends of 25mm
- Constructed from aluminum
- Length: 2 → 6" (15.5 cm)
Technical features of the...
Weight System for IKELITE DLM Housings
IKELITE Housing Weight System
With this system, you can adjust the balance and buoyancy of yourikelite DLM housing, especially if it is positively buoyant.
Technical Specifications:
- Quick attachment under the aluminum base
- Front or rear adjustment...
Detachable Arms DE-ARM 10'' SUPE
DE ARM - 10 inch Supe / Scubalamp :
Why we prefer these on our camera systems? The detachable arms allow us to extend beyond the range of or our traditional arms. We can [detach] remove a light and help "set up" a shot or fill the frame--illuminate a specific foreground, or...
MARELUX handle extensions for housings
MARELUX handle extensions for housings
These extensions allow you to gain a few centimeters in length on your MARELUX housing handles.
Aluminum 8-inch double arm pack SUPE
This arm pack includes:
- 2 SUPE 8" aluminum arms
- 3 SUPE AC02 clamps
Technical features of the 8" aluminum arm:
- Ball-jointed ends of 25mm
- Constructed from aluminum
- Length: 3 → 8" (20.5 cm)
Technical features of the...
Adjustable Arm (Ball Mount) ARM-AJ SUPE
Aluminium photo arm with 25 mm ball with clever length adjustment system:
Adjustable arm with 25 mm diameter ball joints. Made of aluminum. The arm measures 185 mm folded for a maximum extension of 265 mm.
Technical data :
- Terminals with 25 mm diameter ball...
Aluminum 10-inch double arm pack SUPE
This arm pack includes:
- 2 SUPE 10" aluminum arms
- 3 SUPE AC02 clamps
Technical features of the 10" aluminum arm:
- Ball-jointed ends of 25mm
- Constructed from aluminum
- Length: 1 → 10" (25.4 cm)
Technical features of...
Standard Butterfly Clamp AC02 - SUPE
AC02 SUPE / SCUBALAMP clamp:
Explore the different lighting possibilities with this double clamp. The AC02 allows you to connect, for example, a modelling light and additional accessories to a single ball joint.
This means that the lighting possibilities are very varied and...
Aluminum 12-inch double arm pack SUPE
This arm pack includes:
- 2 SUPE 12" aluminum arms
- 3 SUPE AC02 clamps
Technical features of the 12" aluminum arm:
- Ball-jointed ends of 25mm
- Constructed from aluminum
- Length: 2 → 12" (30.5 cm)
Technical features of...
MARELUX housing left handle metal hanger
MARELUX housing left handle metal hanger
Further information will be soon be provided on housing left handle metal hanger
Floating 5.5-inch single arm pack SUPE
This arm pack includes:
- 1 SUPE 5.5" floating arm
- 2 SUPE AC02 clamps
Technical features of the 5.5" floating arm:
- Made of carbon fiber
- Guaranteed strength and durability
- Double 25 mm ball on each side of the arm
- Length...
Camera tray with dual flexible YS arms
Dual camera tray with flexible arms 30 cm:
Double lighting kit composed by I-DAS dual camera tray made of anodized aluminum for a better resistance. Specially designed for underwater photography and video, this kit is perfect for you if you want to dive with your camera as well as...
MARELUX housing right handle metal hanger
MARELUX housing right handle metal hanger
Further information will be soon be provided on housing right handle metal hanger
Floating 5.9-inch single arm pack SUPE
This arm pack includes:
- 1 SUPE 5.9" floating arm
- 2 SUPE AC02 clamps
Technical features of the 5.9" floating arm:
- Made of carbon fiber
- Guaranteed strength and durability
- Double 25 mm ball on each side of the arm
- Length...
TG15 Gopro tray grip Supe
TG15 Supe / Scubalamp handle:
Ergonomic handle supplied with a 25 mm direct mounted ball end.
The Supe TG15 is finished with an aluminum alloy and it is very compact so you can easily carry it in your luggage if you are a traveler!
Finally, the TG15 can also be mounted...
Camera housing base for canon EOS R5 MARELUX
Camera housing base for canon EOS R5 MARELUX
The housing base designed by Marelux is made to attach your MX-R5 housing so you can stabilize your camera body.
Floating 12-inch single arm pack SUPE
This arm pack includes:
- 1 SUPE 12" floating arm
- 2 SUPE AC02 clamps
Technical features of the 12" floating arm:
- Made of carbon fiber
- Guaranteed strength and durability
- Double 25 mm ball on each side of the arm
- Length...
TG ball joint 25 mm Supe for TG10-TG15-TG20
Supe/Scubalamp 25 mm ball joint:
Aluminum ball joint with its 25 mm attachment ball. This ball joint from Supe is designed to be adapted to the following handles: TG10, TG15, TG20.
Technical characteristics :
- materials used: → aluminum, black anodized ...
Camera housing base for canon EOS R6 MARELUX
Camera housing base for canon EOS R6 MARELUX
The housing base designed by Marelux is made to attach your MX-R6 housing so you can stabilize your camera body.
Double pack of single 5.5-inch floating arms
This arm pack includes:
- 2 SUPE 5.5" floating arm
- 4 SUPE AC02 clamps
Technical features of the 5.5" floating arm:
- Made of carbon fiber
- Guaranteed strength and durability
- Double 25 mm ball on each side of the arm
- Length...
12" float arm Supe
Supe / Scubalamp 12" float arm:
Thanks to this Supe float arm, you will be able to lighten your whole system by mounting it on your tray.
Made of carbon fiber, this arm will guarantee you a solidity to any test as well as a duration in time. Being equipped with two 25 mm...
Camera housing base for Sony A7R IV MARELUX
Camera housing base for Sony A7R IV MARELUX
The housing base designed by Marelux is made to attach your MX-A7R IV housing so you can stabilize your camera body.
Double pack of single 5.9-inch float arms
This arm pack includes:
- 2 SUPE 5.9" floating arm
- 4 SUPE AC02 clamps
Technical features of the 5.9" floating arms:
- Made of carbon fiber
- Guaranteed strength and durability
- Double 25 mm ball on each side of the arm ...
5,5" float arm Supe
Supe / Scubalamp 5,5" float arm:
Thanks to this Supe float arm, you will be able to lighten your whole system by mounting it on your tray.
Made of carbon fiber, this arm will guarantee you a solidity to any test as well as a duration in time. Being equipped with two 25 mm...
Camera housing base for Sony A1 MARELUX
Camera housing base for Sony A1 MARELUX
The housing base designed by Marelux is made to attach your MX-A1 housing so you can stabilize your camera body.
Double pack of single 12-inch float arms
This arm pack includes:
- 2 SUPE 12" floating arms
- 4 SUPE AC02 clamps
Technical features of the 12" floating arms:
- Made of carbon fiber
- Guaranteed strength and durability
- Double 25 mm ball on each side of the arm
- Length...
5,9" float arm Supe
Supe / Scubalamp 5,9" float arm:
Thanks to this Supe float arm, you will be able to lighten your whole system by mounting it on your tray.
Made of carbon fiber, this arm will guarantee you a solidity to any test as well as a duration in time. Being equipped with two 25 mm...