Customizable CARBONDIVE cylinder - 2024 6.8L - 300 bars

Description :

CARBONDIVE 300 cylinders are made of a steel block surrounded by a carbon fibre. The strength of the carbon allows a pressure of use at 300 bars.

The thickness of the steel being lower, the carbon cylinders weigh approximately 30% less than another cylinder of the...

Steel cylinder - block 2L 232 bars

Technical specifications:

• Choice of configuration
• Service pressure: 232 bars
• Oxy-Clean/degreased
• Available air volume at the surface: 464 liters
• Diameter: 114 mm
• Height: 305 mm
...

Poignée fixe de bouteille de plongée

Solide et sûre, cette poignée s'adapte sur tous les cols de bouteilles de plongée avec filetage 25x200.

Elle permet la manipulation aisée d'un bloc de plongée 7L, 10L, 12L, 15L et 18L

Bouchon latéral pour robinets extensibles à gauche 230 et 300 bars

Le bouchon modulaire permet d'obturer la sortie latérale des robinets extensibles 230 et 300 bars OMS.

Livré avec:

• bouchon latéral pour robinet extensible gauche

Description :

CARBONDIVE 300 cylinders are made of a steel block surrounded by a carbon fibre. The strength of the carbon allows a pessure of use at 300 bars.

The thickness of the steel being lower, the carbon cylinders weigh approximately 30% less than another cylinder of the...

Technical specifications :

• Choice of configuration
• Volume: approx. 3 litres
• Operating pressure: 200 bar
• Diameter: 11.1 cm
• Height (excluding tap): 51.5 cm
• Weight (excluding tap) in air: 4.4 Kg empty bottle / 5.3 Kg full bottle
...

Cisaille inox OMS avec étui

Cisaille OMS avec gaine en nylon. La gaine se monte sur une sangle de deux pouces et a une fermeture Velcro®.

La longueur totale est de 21.9cm  et la largeur est de 6.3cm. Un anneau en D en plastique est situé à la base de la poche.

Peut être...

Robinet M26 Nitrox mono 232 bars

Caractéristiques:

• Sortie: M26 x 200 Nitrox
• Filetage coté bloc: M25 x 2
• Livré avec tube plongeur et joint de bloc viton
• Oxy Clean

Description:

The CARBONDIVE 300 cylinders are composed of a steel block surrounded by a carbon fiber. The strength of the carbon allows for a working pressure of 300 bars.

Due to the thinner steel walls, carbon cylinders weigh approximately 30% less than another cylinder of the...

Description:

CARBONDIVE 300 bottles are composed of a steel block wrapped with carbon fiber. The strength of the carbon allows for a working pressure of 300 bars.

Due to the thinner steel thickness, carbon bottles weigh approximately 30% less than another bottle of the same...

Description:

The CARBONDIVE 300 bottles are composed of a steel block surrounded by a carbon fiber. The strength of the carbon allows for a working pressure of 300 bars.

Due to the thinner steel, carbon bottles weigh approximately 30% less than another bottle of the same...

Description :

The CARBONDIVE 300 bottles are composed of a steel block encircled by a carbon fiber. The strength of the carbon allows for a working pressure of 300 bars.

Due to the thinner steel, carbon bottles weigh approximately 30% less than another bottle of the same...