List of products by brand TEK PLONGEE
TEK PLONGÉE le spécialiste en France & DOM-TOM de la plongée professionnelle, tek et loisirs.
TEK PLONGÉE le spécialiste en France & DOM-TOM de la plongée professionnelle, tek et loisirs.
Coude orientable Coltri
Coude orientable pour tube ou flexible Coltri. .
Pour les liaisons entre flexible,...
Croix 6S
Croix pour tube de 6mm.
Pour les liaisons entre tube de 6mm ou raccord orientable.
Croix 8S
Croix pour tube de 8mm.
Pour les liaisons entre tube de 8mm ou raccord orientable.
Cylinder valve DIN 230 bar PI for cylinder with 25x200 thread
Cylinder valve DIN 230 bar PI for cylinder with 25x200 thread. Norm PI for cylinders marked PI
Livré avec:
- Valve PI with outlet DIN 230 bar
- 1 O-ring
Technical data:
- Working pressure: 230 bars
- Thread of the...
Dégraissant oxygène 1L
Dégraissant oxygène pur en bidon d'1 Litre
Permet de dégraisser les détendeurs, robinets, blocs de plongée, tuyauteries inox, lyre de transfert Oxygène, vannes ... Après application sur les pièces à dégraisser, l'évaporation totale ne laisse pas de traces et évite les opérations de...
Détecteur de fuite non corrosif pour gaz
Détecteur de fuites pour tous gaz. Permet de déceler toutes fuites d'air ou de gaz sous pression aussi infimes soient-elles. Fluide à réaction mousseuse contenant un inhibiteur de corrosion qui supprime tout risque de corrosion.
...
Discovery Max Housing Package for FG7X-III S FANTASEA with CANON...
Discovery Max Package with FG7X-III S FANTASEA Housing and CANON FG7X-III S + TG20 tray with Trigger Extension
This discovery max package is perfect for you if you want to acquire a complete discovery equipment based on the FG7X-III S. In addition to being able to equip your housing...
Etrier de fixation manomètre
Etrier de fixation pour manomètre D63 mm et prise de pression 1/4"G.
Fantasea FG7X-III S Vacuum Pack + Canon G7X Mark III camera
Fantasea 60-meter diving pack FG7X-III S Vacuum with vacuum pump and electronic leak detector + Canon G7X Mark III camera
Comes with:
- 1 Fantasea housing for Canon G7X Mark III S Vacuum with vacuum port
- Manual vacuum pump
- Double optical fiber cable...
Fantasea Vacuum housing pack + Sony RX100 VA
Fantasea Vacuum underwater photo pack + Sony RX100 Mark 5A camera
Diving pack includes:
- 1 Fantasea FRX100-VA S FAN 15355 housing
- A manual pump and vacuum valve
- Double optical fiber support
- Flash diffuser
- Light and sound moisture...
FG7X-III S FANTASEA Discovery Housing Package
FG7X-III S FANTASEA Discovery Housing Package for CANON G7X Mark III Housing
This discovery package is perfect for you if you want to expand your future mounting possibilities on your FG7X-III housing. Thanks to the SUPE TG20 tray and its trigger extension, not only can you equip your...
Fibre optique universelle pour flash et caissons photo
Kit câble fibre optique spécialement conçu pour les flashs à connectique type SEA & SEA ou pour les flashs Ikelite équipés de l'adaptateur fibre optique .
Livré avec:
- Fibre optique spiralée avec embout de fixation velcro.
- Adaptateur fibre pour...
Filet bouteille de plongée
Filet noir pour bouteille de plongée
Choix du modèle de filet dans la liste déroulante
Le filet pour bouteille de plongée est indispensable pour protéger votre bloc des rayures et garantir une plus grande durée de vie de...
Filling hose for COLTRI compressors with anti-wipe cable and 2...
Filling hose for COLTRI compressors with anti-wipe cable and 2 carabiners.
Technical data:
- Lenght: 0.5 meters to 100 meters ( Choose on the list. Special lenght on request)
- Working Pressure: 500 bars
- Burst pressure : 2000 bars ...
Filling Station for Paintball BULLET PRO 3000 psi with regulator
Filling Station for Paintball BULLET PRO 3000 psi with regulator
The Outlet Fill Panel is a perfect solution for those who don't want to waste their time for filling. The station utilizes a valve system that allows filling tanks by paintballers in safe condition. All internal...
Filling station PAINTBALL V3 inox DIN
Filling station PAINTBALL V3 inox DIN with quick dosconnect . Compatible 3000 psi & 4500 psi
This sturdy, all-stainless steel filling station transfers air from a scuba tank to a 3000 psi rental launcher or a 4500 psi competition launcher (operating pressure of 300 bars)
...Filtre personnel "pro" / air 414 bars avec clapet AR et purge
Filtre personnel de qualité professionnelle. Usiné dans de l'aluminium anodisé bleu.
Ce filtre individuel permet d'éviter "la pollution" d'un bloc de plongée lors d'un gonflage si il y a une doute sur la qualité d'air (du à un mauvais entretien) délivré par le compresseur. Idéal...
Filtre personnel "pro" / air 414 bars avec raccords DIN
Filtre personnel de qualité professionnelle. Usiné dans de l'aluminium anodisé bleu.
Ce filtre individuel permet d'éviter "la pollution" d'un bloc de plongée lors d'un gonflage si il y a une doute sur la qualité d'air (du à un mauvais entretien) délivré par le compresseur. Idéal...
Filtre personnel "pro" / air 414 bars clapet AR purge en valise
Filtre personnel de qualité professionnelle. Usiné dans de l'aluminium anodisé bleu.
Ce filtre individuel permet d'éviter "la pollution" d'un bloc de plongée lors d'un gonflage si il y a une doute sur la qualité d'air (du à un mauvais entretien) délivré par le compresseur. Idéal...
Filtre personnel "pro" / air 414 bars nu
Filtre personnel de qualité professionnelle. Usiné dans de l'aluminium anodisé bleu.
Ce filtre individuel permet d'éviter "la pollution" d'un bloc de plongée lors d'un gonflage si il y a une doute sur la qualité d'air (du à un mauvais entretien) délivré par le compresseur. Idéal...
Flacon 250 ml de glycérine pour manomètre
Flacon 250 ml de glycérine pour manomètre.
La glycérine permet d'amortir les vibrations engendrées par le compresseur ainsi que les coups de bélier.
Gas cylinder mounting bracket for 20L, 30 L and 50L cylinders
Gas cylinder mounting bracket for 20L, 30 L and 50L cylinders
Technical datas:
- For cylinder with diameter between 225 to 230 mm
- Reinforced collar for holding heavy loads
- Fixing by 2 points ...
Gas cylinder mounting bracket for 80L cylinders
Gas cylinder mounting bracket for 20L, 30 L and 50L cylinders
Technical datas:
- For cylinder with diameter between 260 to 270 mm
- Reinforced collar for holding heavy loads
- Fixing by 2 points ...
Graisse Air respirable 400gr
GRAISSE EXTREME PRESSION POUR CONTACT AVEC L'AIR RESPIRABLE :
Cette graisse à hautes performances, de très grande stabilité, se caractérisant par ses...
IKELITE essential pack housing with Fisheye Dome FCON-T02 and OM...
Ikelite Housing Kit with OM SYSTEM TG-7 camera, FCON-T02 Fisheye dome, FCON-T02 lens, and its CLA-T01 converter
The new design in gray ABS and a transparent polycarbonate rear door allow easy verification of the camera's position and control levers within the housing. Highly durable,...
IKELITE housing for OM SYSTEM TG7 with TG-7 camera
Ultra-compact housing, waterproof up to 60 meters, with OM SYSTEM TG-7 camera
This new design features a gray ABS body and a transparent polycarbonate back door, allowing for easy verification of the camera's position and control levers within the housing. Highly durable, it's tested...
IKELITE housing G7X III + CANON G7X-III
Underwater housing package Ikelite waterproof up to 60 meters + Canon G7X Mark III camera
Comes with:
- 1 Ikelite housing for Canon G7X Mark III ref.6146.09
- 1 tube of Ikelite silicone grease
- 1 security strap
- 1 English user manual (French manual...
IKELITE housing kit for OM SYSTEM TG7 with TG7 camera and LG1000
Ultra-compact housing, waterproof up to 60 meters, for OLYMPUS TOUGH TG6 and TG7 cameras with LG1000
This new design features a gray ABS body and a transparent polycarbonate back door, allowing for easy verification of the camera's position and control levers within the housing....
Ikelite housing pack for CANON EOS R10 + CANON EOS R10 camera
Ikelite Waterproof Dive Housing up to 60 meters + Canon EOS R10 camera
This pack is perfect for you if you're looking for a complete set based on the Canon EOS R10 camera!
This photography bundle includes:
- 1...
Ikelite housing pack for CANON EOS R100 + CANON EOS R100 camera
Underwater diving package with Ikelite 60-meter waterproof dome + Canon EOS R100 camera
This package is perfect for you if you're looking for a complete setup based on the Canon EOS R100 camera!
This photography bundle includes:
- 1 Ikelite housing for Canon EOS...
IKELITE Housing Package with Fisheye Dome FCON-T02 and OM SYSTEM TG7
Ultra-compact housing, waterproof up to 60 meters, with OM SYSTEM TG-7 cameras, FCON-T02 Fisheye Dome and FCON T02 optic
This newly designed ABS gray housing with a transparent polycarbonate back door allows for checking the correct positioning of the camera body and control levers...
Industrial valve DIN 200-230 bar / 25E for gas cylinder
Industrial valve DIN 200-230 bar / 25E for gas cylinder
Technical datas:
- Working pressure: 230 bars
- cylinder thread: 25E
- Outlet: DIN 230 bars (Gaz 5/8)
- Weight: 610 grammes ...
Industrial valve DIN 300 bar / 25E for gas cylinder
Industrial valve DIN 300 bar / 25E for gas cylinder. For cylinder of 20L, 30L, 50L and 80L capacity with a 25E thread
Technical datas:
- Working pressure: 300 bars
- cylinder thread: 25E
- Outlet: DIN 300 bars (Gaz 5/8)
- Weight: 633...
Kit de 10 joints pour Quick Disconnect
Kit de 10 joints pour raccord coupleur Quick Disconnect femelle
Les joints s'usent lorsque l'utilisateur oublie de purger la station avant de déconnecter le lanceur.
Livré sans raccord Quick Disconnect.
Kit de 6 feutres pour cartouche Coltri Maxifiltre
Kit de 6 feutres spécifique pour les cartouches COLTRI type maxifiltre
Pour cartouche COLTRI SC000440
Permet de faire 2 recharges de cartouche (les feutres ne sont pas à remplacer de manière systématique).
Diamètre: 40 mm
Kit de joints de rechange pour filtre personnel "pro"
Kit de joints de rechange pour filtre personnel anodisé bleu 414 bars.
Contient:
Kit entretien détendeur CSC000329RID
Kit de révision pour régulateur de pression COLTRI SC000329/RID 2ème génération.
kit pour les détendeurs COLTRI SC000329/RID 2ème génération (filetés sur la partie basse). Ne convient pas aux détendeurs 1ère génération (partie basse hexagonale)
Kit entretien détendeur TEK2G000
Kit d'entretien pour détendeur Haute-Pression
Livré avec:
- Joint d'étanchéité de corps
- Kit clapet avec filtre intégré + joint
- Bague de compensation avec siège intégré
Kit entretien pour robinet modulaire
Kit d'entretien pour robinets modulaire pour bouteilles de plongée.
Kit pour les robinets modulaire avec filetage latéral extérieur (robinets chromés). Pour le choix de votre kit d'entretien, nous consulter.
Il est recommandé de faire la révision des robinets par un technicien...
Kit entretien pour robinet OMS et extensibles
Kit d'entretien pour robinets OMS pour bouteilles de plongée.
Kit pour les robinets modulaire avec filetage latéral intérieur (robinets OMS et SCUBATEC). Pour le choix de votre kit d'entretien, nous consulter.
Il est recommandé de faire la révision des robinets par un...
Kit entretien pour soupape de sécurité CE TEK2C090
Kit d'entretien pour soupape de sécurité CE réglable de 150 à 250 bar TEK2C090
Livré avec:
- 1 clapet équipé joint et contre joint
- 1 ressort inox
- 1 bille inox
Kit entretien pour soupape de sécurité CE TEK2C091
Kit d'entretien pour soupape de sécurité CE réglable de 250 à 375 bar TEK2C091
Livré avec:
- 1 clapet équipé joint et contre joint
- 1 ressort inox
- 1 bille inox
Liftbag 30 Kg to 2000 Kg
Professional underwater liftbag
Made from very sturdy coated canvas. Equipped with a fixing system for underwater work.
Fitted with two valves (nor for 30 Kg and 50 Kg model).
Volume from 30 L to 2000 L.