New products
Fantasea housing Locking Lid Snap
Fantasea housing Locking Lid Snap
This part allows you to replace the Fantasea lid snap in the event of breakage following poor lubrication of the rear door seal.
Best sellers
Convertisseur DL5 DS Link TTL Canon avec connecteur sabot Ikelite CT1
Module iTTL canon pour connecteurs type Ikelite + connecteur Hotshoe CT1
Permet d'utiliser la fonction TTL avec les flashs Ikelite de la série DS51, DS125, DS160 et DS161 pour les caissons équipés d'une prise de synchronisation de flash type Ikelite
...
Industrial valve DIN 200-230 bar / 25E for gas cylinder
Industrial valve DIN 200-230 bar / 25E for gas cylinder
Technical datas:
- Working pressure: 230 bars
- cylinder thread: 25E
- Outlet: DIN 230 bars (Gaz 5/8)
- Weight: 610 grammes ...
OMS 2.7 Kg utility lead pouch
Technical data :
- Material: 1000 denier Cordura
- Velcro utility pocket
- Colour: black
- Removable D-rings to attach accessories
- Unit capacity of each pocket: 2.7 Kg
Filling station PAINTBALL V3 inox DIN
Filling station PAINTBALL V3 inox DIN with quick dosconnect . Compatible 3000 psi & 4500 psi
This sturdy, all-stainless steel filling station transfers air from a scuba tank to a 3000 psi rental launcher or a 4500 psi competition launcher (operating pressure of 300 bars)
...Autocollant NITROX 38x9cm
Autocollant pour bouteilles NITROX 38 x 9 cm
Pour bouteilles de diamètre 100 à 160 mm de diamètre.
Bague de zoom universelle IKE 5509.31
Bague de zoom Ikelite 5509.31
Consulter les chartes de compatibilité d'objectif dans la fiche technique de votre caisson pour sélectionner le bon modèle.
Bague de zoom universelle IKE 5509.29
Bague de zoom Ikelite 5509.29
Consulter les chartes de compatibilité d'objectif dans la fiche technique de votre caisson pour sélectionner le bon modèle.
NiMH Battery Pack for DS230 Strobes
Batterie Ni-MH de rechange pour flashs IKELITE DS125, DS160 et DS161.
Attention, ce pack batterie nécessite l'emploi du chargeur spécifique IKE 0083.93 .
Le chargeur IKE 4067.1 des batteries Li-Ion (vendu entre mai 2013 et janvier 2016) n'est pas compatible avec ce pack...
copy of Flash D-MAX strobe SUPE
Flash D-MAX STROBE.
Un monstre de puissance avec sa puissance de sortie de 250 Watt/secondes. Il écrase ses concurrents avec un gain de 165% de puissance en comparaison des prédécesseurs les plus puissants du marché 2021 comme les flashs DS160 et RETRA PRO.
Son tube de flash...
Yellow SMB 3.3 open bottom
The SMB HYBRID 3.3 from OMS is unique in the fact that it can be inflated in 3 ways; using an octopus at the opening on the bottom...
Fantasea UCL-06LF +12 Macro Lens
UCL-06LF Fantasea +12 Macro Lens
UCL-06LF is a quality wet macro lens with a +12 diopter. It magnifies the subject and enables the camera to focus short distances, creating sharp, detailed and impressive images. It is perfect for shooting close-up images of tiny creatures, fish,...
IKELITE DS232 TTL strobe with video light
DSIKELITE DS230 TTL underwater strobe with video light
Three factors define professional grade lighting: Quality of Light, Speed, and Dependability.
- Professional quality light for wide angle and macro
- Fastest recycle time
- 2500 lumens COB LED video...
Lens FLIP Diopters - Single (S01) SUPE
Lens flip diopter SUPE / SCUBALAMP S01 67 mm for macro lens
Constructed from high quality aerospace aluminum, this 67 mm macro lens flip allows you to use your macro lens with a simple flip action.
This adapter can be screwed onto any camera housing with a 67 mm thread.
...Vinyl Break-Away Lanyard IKELITE
Vinyl break-away lanyard with locking ring as featured with many Ikelite flashlights, accessories, and compact digital housings.
For safety reasons, this lanyard is designed to break if caught on an object underwater. We do not recommend carrying a flashlight by the lanyard on...
V4K v2 video light 7600 lumens SUPE
SUPE Scubalamp V4K v2 video light/cinema quality COB LED video - 7600 lumens
The V4K v2 is a professional underwater video light with a cinema quality 18 mm COB LED. It will satisfy you and will illuminate your subjects perfectly thanks to its faithful reproduction of natural colors....
PV52T video light 5000 lumens Supe
PV52T video light Supe / Scubalamp :
The PV52T is a compact LED light specially designed for underwater video and photography. A new range of products specially developed to better illuminate the underwater world. The PV52T from Supe uses the latest LED lighting technology.
...12" float arm Supe
Supe / Scubalamp 12" float arm:
Thanks to this Supe float arm, you will be able to lighten your whole system by mounting it on your tray.
Made of carbon fiber, this arm will guarantee you a solidity to any test as well as a duration in time. Being equipped with two 25 mm...
Miflex Direct System hose carbon
The advantages of Miflex over traditional rubber hoses:
- EN250 certified
- Longer life
- Reinforced multi-layer jacket
- Polyether based TPU lining
- Extreme flexibility
- Excellent abrasion resistance
- Breaking pressure more than 2 times...
Miflex Direct System hose green
The advantages of Miflex over traditional rubber hoses:
- EN250 certified
- Longer life
- Reinforced multi-layer jacket
- Polyether based TPU lining
- Extreme flexibility
- Excellent abrasion resistance
- Breaking pressure more than 2 times...
Miflex Direct System hose yellow
The advantages of Miflex over traditional rubber hoses:
- EN250 certified
- Longer life
- Reinforced multi-layer jacket
- Polyether based TPU lining
- Extreme flexibility
- Excellent abrasion resistance
- Breaking pressure more than 2 times...
Miflex Direct System hose red
The advantages of Miflex over traditional rubber hoses:
- EN250 certified
- Longer life
- Reinforced multi-layer jacket
- Polyether based TPU lining
- Extreme flexibility
- Excellent abrasion resistance
- Breaking pressure more than 2 times...
Miflex Direct System hose blue
The advantages of Miflex over traditional rubber hoses:
- EN250 certified
- Longer life
- Reinforced multi-layer jacket
- Polyether based TPU lining
- Extreme flexibility
- Excellent abrasion resistance
- Breaking pressure more than 2 times...
Customizable steel cylinder - 15L - 232 bars
Steel cylinder - 15L block 232 bars
Technical specifications :
- Choice of configuration
- Service pressure: 232 bars
- Oxy-clean / degreased
- Available air volume at surface: 3480 liters
- Diameter: 204 mm
- Height: 640 mm ...
OMS complete elbow assembly before 2015
This kit includes the inflator elbow, a seal, the ring, and two clamps
SUPE D-PRO strobe
D-PRO strobe
Its circular flash tube provides exceptional image quality without any shadow areas.
Its exceptional burst mode allows for up to 10 continuous shots at full power in mode 1 and 12 shots in mode 2. It recharges at full power in less than 0.5 seconds and is thus the...
COLTRI ICON 100 SH
Coltri ICON 100 SH compressor with petrol engine
This version of the MCH6 compressor has been developed to meet the needs of high-pressure air, such as breathing air for diving, fire safety services, and small paintball structures. Different engine options...
COLTRI ICON 100 SK
Coltri ICON 100 SK compressor with petrol engine
This version of the MCH6 compressor has been developed to meet the needs of high-pressure air, such as breathing air for diving, fire safety services, and small paintball structures. Different engine options...
1/4-20 x 5/8" Screw Kit for non-IKELITE housings
Technical specifications:
- This screw kit will allow you to mount a non-Ikelite housing on your tray once it is installed
Ikelite 4081.24 Clamp
The Ikelite 2-way Clamp for 25mm balls, Mark II type, is compatible with the 4081.71 offset auxiliary mount
This 2-way clamp can be mounted on any 25mm arm ball. Its aluminum handle and sturdy design ensure optimal operation for years.
The offset threaded mount allows you to...
IKELITE 200DL housing for CANON EOS R6, R6 MARK II
Ikelite 200DL waterproof housing (DRY LOCK) for Canon EOS R6, R6 MARK II digital cameras
- This next-generation housing offers excellent handling. The transparent Lexan on the back door allows for easy verification of the camera body and control levers' proper positioning inside...
Automatic drain valve for MCH6 - ICON
Automatic purge kit for all models of COLTRI MCH6 electric compressors.
This option can be installed as original equipment at the factory or easily adapted by you later.
Supplied with:
- 1 set of stainless steel 316L high-pressure solenoid valve + timer + electrical...
Automatic shut-off option for ICON / MCH6
Automatic shut-off kit for all models of electric and gasoline-powered COLTRI ICON / MCH6 compressors
This option can be installed as original equipment at the factory or easily adapted by you later.
Supplied with:
- 1 pressure switch automatic shut-off kit with...
DIVEVOLK wide-angle conversion lens
DIVEVOLK 67mm Wide-Angle Conversion Lens
With this lens, you can achieve the same field of view underwater as on land. This lens is also compatible with all smartphone housings that have a 67mm thread.
Technical Specifications:
- Depth Rating: 60m
- Thread...
Discovery pack DIVEVOLK SeaTouch 4 Max
Divevolk SeaTouch 4 Max discovery pack + protective film + protective pouch
This pack is for you if you want to purchase a complete protective setup to safeguard your SeaTouch 4 Max housing!
Diving pack includes:
- 1 Divevolk SeaTouch 4 Max housing
- 1...
IKELITE Housing for OLYMPUS TG7-OM, TG6, and TG5
Ultra-compact housing, waterproof up to 60 meters, for OLYMPUS TOUGH TG7-OM, TG6, and TG5 cameras
The new design features a gray ABS body and a transparent polycarbonate rear door that allows for easy verification of the camera housing and control levers inside the housing. It is...
IKELITE tray mount for ultra compact housing
IKELITE tray mount for ultra compact housing
This threaded tray mount is 1/4-20/Kodak thread and is intended for ultra-compact IKELITE housings
Y shaped mount with mounting ball for MARELUX housing (M5 screw)
Y shaped mount with mounting ball for MARELUX housing (M5 screw)
Plaque dorsale aluminium OMS
Plaque dorsale OMS en aluminium
Comme pour tous les produits OMS, une immense quantité de travail en bureau d'étude et à la fabrication est nécessaire pour créer une plaque parfaite. Les plaques dorsales OMS ont été perfectionnées au fil des années pour fournir une finition et des...
OMS stainless steel back plate
Technical data :
- Material: polished stainless steel
- Weight: approx. 2.2 kg (weight may vary slightly depending on production)
- Possibility to fit 1" and 2" straps (25 and 50 mm)
- 22 holes for the attachment of accessories such as a padded protection for...
Small utility pocket OMS
Technical data :
- Material: 1000 denier Cordura
- Color: black
- Loops on the back for mounting on a 50 mm belly strap or other strap
- An inner ring allows the attachment of a safety tie
Dimensions :
- Wide: 25 cm
- Height: 16...
Inflateur coudé OMS
Inflateur OMS de direct-system à embout bucal coudé
Inflateur de direct-system à embout bucal à 45° pour wings OMS et autres marques.
Livré avec goupille en acier inox (sans colliers de serrage et sans tuyau annelé).
Triple OMS wrist slate.
Technical specifications :
- Attached carbon pencil with elastic cord.
- Three pages.
- Double wrist attachment options, either with adjustable Velcro strap or two adjustable elastic cords.