New products

BP05 SUPE/SCUBALAMP battery:

This lithium-ion battery is a must if you are a travelling diver and want to make sure you have extra security in case your video lights runs out of battery.

We can only advise you to have at least one extra battery for your light equipment. 

AC03 SUPE / SCUBALAMP clamp:

Explore the different lighting possibilities with this triple clamp. The AC03 allows you to connect a focus light, a GoPro and additional accessories to a single ball joint. 

This gives you a wide range of lighting options and freedom depending on...

Supe / Scubalamp OSD adapter ring:

This adjustable adapter ring will allow you to use the Supe OSD optical focusing device on many strobes.

Indeed, you will be able to use it for the following strobes : D-MAX, Seacam 150D, 160D, Ikelite 160, 161, Sea&Sea YS-D2, YS-D3,...

IQ Lite CB signature diving harness + wing performance mono pink OMS 

If you are a diver looking for a pack containing a quality harness and wing, then we have exactly what you need!

This OMS IQ Lite CB signature and wing performance mono pack is made for technical and...

The advantages of Miflex over traditional rubber hoses:

• EN250 certified
• Longer service life
• Reinforced multi-layer jacket
• Polyether based TPU lining
• Extreme flexibility
• Excellent abrasion resistance
• Breaking pressure more than...

The advantages of Miflex over traditional rubber hoses:

• EN250 certified
• Longer life
• Reinforced multi-layer jacket
• Polyether based TPU lining
• Extreme flexibility
• Excellent abrasion resistance
• Breaking pressure more than 2 times...

The advantages of Miflex over traditional rubber hoses:

• EN250 certified
• Longer life
• Reinforced multi-layer jacket
• Polyether based TPU lining
• Extreme flexibility
• Excellent abrasion resistance
• Breaking pressure more than 2 times...

The advantages of Miflex over traditional rubber hoses:

• EN250 certified
• Longer life
• Reinforced multi-layer jacket
• Polyether based TPU lining
• Extreme flexibility
• Excellent abrasion resistance
• Breaking pressure more than 2 times...

FG7 Fiber optic plate Assy fantasea

OMS "Tattoo Frameless" masks in full colour

• Coloured masks (Speed Yellow, Ocean Blue, Miami blue, Indian red, Pink, White and Green)
• Dual lens safety without UV treatment
• 3D contour strap system to prevent the mask from collapsing
• 2 sizes: Small (Asian)...

OMS "Tattoo Frameless" masks in full colour

• Coloured masks (Speed Yellow, Ocean Blue, Miami blue, Indian red, Pink, White and Green)
• Dual lens safety without UV treatment
• 3D contour strap system to prevent the mask from collapsing
• 2 sizes: Small (Asian)...

Ball joint BJ05 SUPE / SCUBALAMP :

Ball of 25 mm in black anodized aluminium with stainless steel screw 6mm.

Technical characteristics:

• materials used: black anodized aluminium
• weight on ground: 29 g

Steel cylinder - block 2L 232 bars

Technical specifications:

• Choice of configuration
• Service pressure: 232 bars
• Oxy-Clean/degreased
• Available air volume at the surface: 464 liters
• Diameter: 114 mm
• Height: 305 mm
...

Inflator elbow collar for OMS BCA-512 wings manufactured before 2015.

Allows to keep the elbow attached to the wing

Inflator elbow for OMS BCA-510 wings manufactured before 2015

Coltri ICON 100 SH compressor with petrol engine

This version of the MCH6 compressor has been developed to meet the needs of high-pressure air, such as breathing air for diving, fire safety services, and small paintball structures. Different engine options...

Coltri ICON 100 SH Stainless steel  compressor with petrol engine

This version of the MCH6 compressor has been developed to meet the needs of high-pressure air, such as breathing air for diving, fire safety services, and small paintball structures....

Coltri ICON 100 SK compressor with petrol engine

This version of the MCH6 compressor has been developed to meet the needs of high-pressure air, such as breathing air for diving, fire safety services, and small paintball structures. Different engine options...

Technical specifications:

• This screw kit will allow you to mount a non-Ikelite housing on your tray once it is installed

Ikelite 200DL waterproof housing (DRY LOCK) for Canon EOS R6, R6 MARK II digital cameras

• This next-generation housing offers excellent handling. The transparent Lexan on the back door allows for easy verification of the camera body and control levers' proper positioning inside...

Ikelite Anti-Reflective Ring for Canon RF 14-35 mm f/4L lens

Ikelite Anti-Reflective Ring for Canon RF-S 18-45 mm f/4.5-6.3 IS STM

IKELITE 44700 Manual Fiber Optic

Compatible Housings:

• All IKELITE 200 DL Housings
• All IKELITE 50 DL Housings
• IKELITE 200 DLM Housings with electrical bulkhead or 1/2-20 threaded accessory port
• Please note that this optic fiber is not designed...

Zoom focus gear for Ikelite housing IKE 5515.19

Also compatible with other lenses, please refer to the lens compatibility chart or contact us for further information.

Automatic shut-off kit for all models of electric and gasoline-powered COLTRI ICON / MCH6 compressors

This option can be installed as original equipment at the factory or easily adapted by you later.

Supplied with:

• 1 pressure switch automatic shut-off kit with...

Technical specifications :

• Working pressure: 330 bar
• Inlet and outlet: 1/4" female
• Materials: nickel-plated brass

O-ring Ikelite 0132.30 for compact port

Zoom ring IKE 5515.44

Refer to the lens compatibility charts in the technical specifications of your housing to select the correct model.

Water sports pack DIVEVOLK SeaTouch 4 Max + 1 dome lens + 1 protective pouch

This package is designed for you if you want to capture shots both in the air and underwater during your sporting outings. Not only is it suitable for sports like surfing, kitesurfing, snorkeling, kayaking,...

FANTASEA FRX100-VII S Compact Housing, waterproof up to 60 meters, for SONY RX100 mark 6 and RX100 mark 7 cameras

This Fantasea housing is designed to provide easy access to all the camera's essential functions, even when wearing gloves, through levers and push buttons. Its double...

IKELITE tray mount for ultra compact housing

This threaded tray mount is 1/4-20/Kodak thread and is intended for ultra-compact IKELITE housings

This arm pack includes:

• 1 SUPE 5.5" floating arm
• 1 SUPE 12" aluminium arm
• 3 SUPE AC02 clamps

Technical features of the 5.5" floating arm:

• Made of carbon fiber
• Guaranteed strength and durability
• Double 25 mm ball on...

Y shaped mount with mounting ball for MARELUX housing (M5 screw)

The SUPE / SCUBALAMP UM5.5 high-brightness underwater external monitor offers 3000 cd luminosity

This underwater monitor allows you to have a real-time display of your camera on a 5.5-inch screen. It's designed to be paired with cameras equipped with a free HDMI port.

Ikelite Anti-Reflective Ring for SONY FE 16 - 35 mm f/4 PZ G

Optional Pressure maintening valve for COLTRI ICON 100 or MCH6

This option can be fitted as standard in the factory or retrofitted by you very easily.

The pressure maintaining valve or valve optimizes the quality of filtration by preventing air from leaving the compressor until...

Fantasea housing Locking Lid Snap

This part allows you to replace the Fantasea lid snap in the event of breakage following poor lubrication of the rear door seal.

Wide-angle diffuser filter D200 for D-PRO SUPE / SCUBALAMP diving light:

With this light diffuser filter, you can increase the coverage angle of your light beam.

This diffuser filter is designed to fit the D-PRO light from the Supe range.

Wide-angle diffuser filter D210 for D-PRO SUPE / SCUBALAMP diving light:

With this light diffuser filter, you can increase the coverage angle of your light beam.

This diffuser filter is designed to fit the D-PRO light from the Supe range.

Decanting hose with pressure gauge for pressure balancing between 2 diving, shooting or paintball air bottles with compatible DIN 230 and DIN 300 bar connection

Main Features:

• Ergonomic: Provides a comfortable grip for easy transport.
• Foldable: Folds for compact and convenient storage.
• Secure: Reduces the risk of overturning during transport.
...

BAUER filling hose 1m N2817

PV22V3 Light: A professional and versatile solution for underwater photography and video with premium features.

The reflector on this light provides a soft, even beam with no abrupt drop-off at the edges, ensuring a smooth beam without...

V4KV3 Light: A professional solution for underwater video with premium features.

Compared to previous models, the V4KV3 offers higher power, improved battery life, and 10 lighting modes.

The reflector creates a soft-edged beam with no harsh...

V6KPROV3 Light: A professional solution for underwater videography with high-end features.

The V6K PRO V3 is a powerful and durable video light, engineered to greatly enhance color and light quality in your underwater videos.

The reflector design...

Double handle plate for DIVEVOLK housings

Enhance stability and control in your underwater shots with the Divevolk double-handle plate, designed for smartphone and compact camera housings.

Key Features:

• Optimal stability: ensures a secure and...

Lampe à éclats stroboscopique STROBE 200

Son éclat permet de matérialiser efficacement et de retrouver plus facilement un mouillage en plongée, ou de se faire mieux repérer en surface en cas de mauvais temps.

Sa technologie LED permet une résistance, une puissance et une...