- Online only
- -€400.00
COLTRI MCH6/ICON LSE 80 EM 4.8 m3/h Electric 230 V Single LIMITED EDITION
COLTRI LIMITED EDITION MCH6/ICON LSE 80 EM 4.8m3/h - 80 Liters/Min - Electric Motor 230 V - 240 V Single Phase. 230 bar operating pressure
About the LIMITED EDITION COLTRI MCH6/ICON LSE 80 EM 4.8m3/h - Electric Motor 230V
- Limited edition featuring the 80l/min MCH6 block with a flow rate of 4.8m3/h. Tested thousands of times worldwide in the most challenging conditions. This specific version is perfectly sized for optimal performance with a 2 kW motor.
- The welded mechanical frame of the standard range promotes good cooling flow and ensures user safety. The frame includes a gasoline engine, a compression unit, a filtration system, and a flexible output with a DIN or yoke inflation fitting. The epoxy powder resin coating provides effective protection in harsh environments. For the most challenging operating conditions (marine environment), the compressor is also available in a version with a stainless steel frame.
- The ICON/MCH6 range compressor is equipped with multiple filtration systems certifying air quality that meets the requirements of the EN 12021:2014 standard. The compressor block is equipped with cyclone separators on the 4th stage. The final filtration ensures oil, odor, and water filtration. An optional pressure-holding valve is available for industrial processes on fixed networks.
STARTUP AND TEK PLONGEE WARRANTY - COLTRI FRANCE AND OVERSEAS DISTRIBUTOR :
- All our compressors are delivered already commissioned, adjusted, and tested in our workshops in France. Equipment ready to use.
- The compressor is supplied with an operating procedure and tips for breaking in and maintenance.
- Telephone support with our team of technicians for maintenance, servicing, and troubleshooting included. 20 years of experience in high-pressure compressed air.
- TEK PLONGEE Warranty - Coltri France Distributor for 2 years *
- Compressors purchased outside the COLTRI France dealer network, especially foreign sites (including those translated into French), are not covered by our services, and these compressors must be returned at your expense directly to the foreign dealer where the compressor was purchased.
Technical specifications :
- Limited Edition MCH6 Block
- Welded mechanical frame with transport handles: black frame RAL 9005
- Manual purges (Automatic purges optional, select from the product sheet)
- Shutdown by safety valve (Automatic shutdown optional, select from the product sheet)
- Oil and water separator
- Safety valves
- ECO FILTER ICON/MCH6 Filtration
- Hour meter
- 1 front flexible output with DIN 230 bars (optional yoke adapter RE100350)
- Single-phase electric motor 230 V - 240 V, 2 kW - 2.68 Hp
- Compression block flow rate: 80 l/min - 4.8 m³/h - 3.17 CFM
- Compression block speed: 2,250 RPM
- Operating pressure: 232 bars - 3,300 PSI
- Oil sump capacity: 0.3 liters
- Sound intensity / 91 dB (Guaranteed Lwa)
- Sound intensity / 88 dB (Measured Lwa)
- Sound intensity / 68 dB (Measured Lpa)
- Empty weight: 38 kg / 83.7 lb
- Dimensions: 61 x 40 x 39 cm (L x W x H)
- For generator users, plan for a minimum 4 KVA generator (5 KVA recommended). Starting current peak of 42 A.
Data sheet
- Height
- 39 cm
- Width
- 61 cm
- Depth
- 40 cm
- Weight
- 38 Kg
- Pression de service
- 230, 300 ou 330 bars
- Énergie
- Electrique monophasé
- Puissance moteur
- 2 KW / 230 Volts / 50 Hz
- Intensité sonore en dB(A) à 1m
- 88
- Compresseur insonorisé
- NON
- Matière
- RAL 9005 Black frame
- Purges automatiques
- EN OPTION
- Arrêt automatique
- EN OPTION
- Filtration rechargeable
- NON
- Manomètres inter-étages
- NON
- Filtration PRESEC-SECURUS
- NON
- Nombre de sorties flexibles avec robinet
- 1
- Mobilité du compresseur
- Compresseur mobile
Specific References
Air Filter cartridge for ICON 100 / MCH 6 and EOLO COLTRI
ECO FILTER Air Filter cartridge for ICON 100 / MCH 6 and EOLO COLTRI
Several cartridge models are available depending on the use of the compressor (Select from the list located under the item price):
- For breathing air compressors: CA/TM model (Activ carbon / molecular...
Filtre aspiration pour MCH6
Filtre d'aspiration micronique pour compresseur Coltri MCH 6
Durée de vie:
- Les filtres à air doivent être remplacés au maximum toutes les 100 heures ou 1 fois par an*.
* Remplacement annuel au minimum si application pour air respirable pour...
Option 2ème sortie
Option 2ème sortie pour compresseur MCH6 à MCH36.
Permet de doubler le nombre de blocs à gonfler en simultané. Le Té fourni permet de raccorder le flexible d'origine du compresseur au kit 2ème sortie.
Livré avec:
- 1 raccord en Té pour connectique...
Flexible de gonflage H.P air respirable COLTRI
Ce flexible Haute-Pression équipe de série les compresseurs et stations de gonflage COLTRI.
Kit entretien détendeur CSC000329RID
Kit de révision pour régulateur de pression COLTRI SC000329/RID 2ème génération.
kit pour les détendeurs COLTRI SC000329/RID 2ème génération (filetés sur la partie basse). Ne convient pas aux détendeurs 1ère génération (partie basse hexagonale)
Rallonge de ligne d'aspiration déportée 2 m pour MCH6
Ligne d'aspiration flexible déportée de 2 mètres pour MCH6.
Ce montage flexible permet de déporter la prise d'air d'aspiration des compresseurs MCH6 électrique et essence.
Autres longueurs disponibles sur demande. Il est cependant conseillé d'éviter des...
Courroie pour compresseur COLTRI (par modèle)
Courroie trapézoidale de rechange pour compresseur Coltri (Choisir le modèle dans la liste déroulante située sous le prix du produit)
Une courroie inadaptée peut entrainer des disfonctionnements graves sur le compresseur et des dégâts irréversibles.
Une courroie mal tendue peut...
Synthetic Coltri Oil ST755 for breathing Air, Nitrox, natural gaz
Synthetic Coltri Oil ST755 for breathing Air, Nitrox, natural gaz and COLTRI compressors
This oil is the best choice for better performance on COLTRI Breathing Air compressors, Nitrox compressors (up to 40% of O2) CNG compressors and also Helium and Nitrogen...
DIN / INT YOKE filling connection adapter
DIN / INT YOKE filling connection adapter
Adapter to fit a DIN diving regulator on a INTERNATIONAL YOKE SYSTEM cylinder valve.
Synthetic Coltri Oil ST755 for breathing Air, Nitrox, natural gaz
Synthetic Coltri Oil ST755 for breathing Air, Nitrox, natural gaz and COLTRI compressors
This oil is the best choice for better performance on COLTRI Breathing Air compressors, Nitrox compressors (up to 40% of O2) CNG compressors and also Helium and Nitrogen...
Air Filter cartridge for ICON 100 / MCH 6 and EOLO COLTRI
ECO FILTER Air Filter cartridge for ICON 100 / MCH 6 and EOLO COLTRI
Several cartridge models are available depending on the use of the compressor (Select from the list located under the item price):
- For breathing air compressors: CA/TM model (Activ carbon / molecular...
COLTRI ICON LSE 100 ET
About the COLTRI ICON LSE 100 ET 6m3/h compressor - 230V electric motor
- The ICON block is designed to last, having been tested thousands of times worldwide in the toughest conditions. This specific version is perfectly sized for optimal performance...
Breathing air compressor COLTRI SMART 210 EM - 12.6 m3/h - 240 V...
High pressure breathing air compressor COLTRI SMART 210 EM - 12.6 m3/h - 240 V single-phase.
COLTRI SMART breathing air compressors represent the evolution of the Standard, one of the best known and best-selling models in the world
3-stage high pressure pumping unit.
...COLTRI ERGO 270 SH PETROL
Please contact us for pricing
COLTRI ERGO 270 SH PETROL Compressors
The ERGO PETROL range is ideal for intensive professional use. Equipped with 2 front flexible inflation outlets, a drive motor, a robust compression block, automatic drains,...
COLTRI ERGO TPS 235 ET
Please contact us for pricing information.
COLTRI ERGO TPS 235 ET Compressor
The ERGO TPS - Tropical Plus range has been designed to address the following challenges: a no-compromise compressor for intensive use, hot environments (poorly...